The 5.9 diesel engines are designed for ample trucks and commercial vehicles. The flood pump on a diesel engine is main to distribute coolant throughout the radiator. This Testament prevent the engine from overheating. Installing a H2O pump on the diesel engine involves detaching and removing manifold parts on your vehicle. Install the alternator and the bracket with the ratchet. Tighten the water pump pulley bolts with the torque wrench.6.
Position a extract pan underneath the radiator. Frank the filter plug and let on the fluids to flow. Lasting the plug once the radiator is emptied.
2. Position the chocks on the rear wheels of the vehicle. District a jack underneath the front butt end of the vehicle. Stand the vehicle with the jack.
3. Remove the bolts with the wrench on the bathe pump pulley. Detach the bracket and alternator with the ratchet.
4. Detach the clamp with screwdriver on the lower radiator hose. Unscrew the mounting bolts on the water pump with the ratchet. Remove the hose and o-ring. Lay the just out o-ring on the damp pump housing. Remove the fossil dilute pump.
5. Install the contemporary water pump. Replace the mounting bolts and tighten with the ratchet. Connect the radiator hose and clamp with the screwdriver. The next details Testament fit the needed tools and mechanism to install a inundate pump on a 5.9 diesel engine.
Instructions
1. Detach the contravening cable of the battery with the wrench.Pour coolant into the radiator. Connect the negative battery cables with the wrench. Lower the vehicle using the car jack. Start the vehicle and check underneath the engine for leaks.
