Removing and replacing a window regulator in a Lincoln Navigator becomes imperative whether the regulator breaks, evidenced by the window glass either falling down into the door or titling forward as whether it's come off track. The regulator raises and lowers the window in the window channel when the window Engine moves the regulator's gear. When a regulator breaks, it can no longer clout the window in the Correct position at the Correct alignment, necessitating replacement. Anyone with choice Car repair skills can remove and transform the window regulator on a Lincoln Navigator in approximately an interval.
Instructions
1. Pry the sail panel trim off the upper essential column of the Navigator's door panel using the trim effects. Remove the hex intellect screws from the backside of the door panel using the hex bit socket place and wrench.
2. Lift the door panel upward diverse inches until the trim hooks in the back shiny the Navigator's door. Grasp between the door panel and the door and disconnect the wiring harness from the door panel switch plate by ability. Proceeding the door panel gone from the duty margin and establish it down.
3. Insert the replacement window regulator through the large door access hole. Bolt the new regulator to the door support brackets, window motor and the base of the window glass using the socket set.7. Reinstall the Navigator's door panel, reversing the procedure for removing it.
5. Fold the window regulator closed by hand. Remove the broken regulator from the Navigator's door by hand through the large door access hole.
6. Lift the Navigator's window glass to the top of the door by participation. Attach the glass to the door top using packing tape.4. Unbolt the window regulator from the replica of the window, the door facilitate brackets and the window Engine using the socket locate.
