The windscreen washer pump, or Engine, is compelled for creation undeniable that windscreen washer fluid is forced nailed down the nozzles on top of the hood so that you can Disinfected your windscreen provided it gets soil while you're driving. The pump is a Engine that, over day, may wear elsewhere. Now wiper fluid is not used as still as other components on your Jeep, you may never require to convert this belongings. On the other hand, if you do, follow these suggestions.
Instructions
6. Unplug the electrical wiring running to the pump/motor.7. Remove the bolts holding the pump in place and remove the pump.
Pull the wiper arm away from the windshield until it locks in a vertical position.
3. Remove the retaining nuts on the wiper arm and lift the arm from the wiper motor/pump.
4. Open the hood and remove the weatherstripping from the cowl area.
5. Disconnect the linkage from the ball connector using a flat-tip screwdriver.
1. Disconnect the negative battery terminal. Loosen the nut on the cable clamp until the clamp slides off the negative battery terminal.2.
8. Install a new pump. Installation is the reverse of removal.
