Anticipate spending at least 30 minutes to remove the fender.
The 1965 Ford Mustang was equipped with one-piece detachable front fenders. Attached to the front of Everyone fender is a headlight housing that can be separated from the fender whether so desired. Although removing the fender is a quite straightforward means, the main is clever the mark of indefinite esoteric bolts. Annoyance must be taken when lifting the fender off of the machine to avoid deficient it due to the fender is substantial and Testament flex.
Instructions
1. Remove the bolts that secure the bumper brackets to the frame with a deep-set socket wrench. The bumper brackets are located underneath the front of the bumper.
2. Remove the bolt that secures the Everyone deadline of the bumper to the fender with a deep-set socket wrench.
3.9. Remove the bolt from the bottom of the fender, just behind the tire, with a deep-set socket wrench.10.
5. Remove the two bolts that secure the front of the fender to the front of the radiator abutment with a socket wrench.
6. Remove the bolts that secure the top of the fender to the top of the engine compartment with a socket wrench.
7. Open the door to access one fender bolt located inside of the door jamb, just above the upper door hinge, then remove the bolt with a socket wrench and a socket extension.
8. Remove the single screw that secures the plastic kick plate the interior of the car next to the occupant's feet with a Phillips head screwdriver, then pull the panel away to reveal a fender bolt access hole. Remove the bolt with a socket wrench and a socket extension.
Lift the bumper off of the automobile.4. Unplug the headlight's wiring harness from the vehivle's leading wiring harness by accessing the harnesses from inside the shove fine and pulling the two connexion pieces apart.
Lift the fender off of the Mustang.
