Installing a current catalytic converter on a 1989 Toyota pickup is not a arduous activity, on the other hand being of the expenditure of a inexperienced converter, it is considerable to correct diagnose the decrepit unit and create trustworthy it is wick. Fit the new front gasket in place, and maneuver the new converter against the exhaust pipe flange. Insert two new bolts, and hand-tighten them into place. Align the rear pipe in place, and slide the gasket between the pipe and the converter. Fit two bolts into the flange holes.
Instructions
1. Jack up the truck, and put jack stands under the frame. Lower the truck onto the stands. Immediately leading away from the engine exhaust pipe is the catalytic converter. It is bolted into place by two front bolts and two rear bolts. Spray the bolts with aerosol lubricant, and allow time for the lubricant to penetrate and loosen the rust formation created by the hot exhaust and exposure to the elements.
2. Loosen the bolts -- both front and rear -- and remove the old catalytic converter. Use a wire brush to brush away the scale and residue from the old gasket left behind. Make sure the pipes are clean and ready to accept the new gaskets and converter.
3. Most much converters change into restricted and the engine Testament not hold sufficient ability. The Motor lorry Testament not accelerate properly or be able to arrive top velocity. It besides might not indolent correct, and going up a miniature hill will be problematic. In cases like these, the converter usually needs replacement. Securely tighten all four bolts.
