Plastic fender repair is Unceremoniously with the equitable tools, familiarity and tools.
Plastic fenders on ATVs, motorcycles and automobiles can suffer any character of damages, especially force damage from abuse or collisions. Depending upon the news makeup of the plastic, it can be repaired in a digit of ways by using altered products and applications. The trick is to repair the crack or split with a product and way that offers the first-rate reinforcement and impulse. Kits are available that assure Correct bonding and holding strengths that can conduct the crack from reopening. The criterion vehicle owner can displace a hardly any not difficult techniques and employ some basic tools to repair his own damaged fender.
Instructions
1. Remove the fender from the vehicle with the obtain socket or edge wrench. Locate a plastic tarp on the ground and lay the fender on it. Handle a drill Engine and a genuine bitty bit (1/8-inch) to drill holes encircling the frontier of the crack or split. Extent the holes approximately 1/8-inch apart, surrounding the crack on all sides. Widen the crack opening by using the drill to chop a channel. Create this by drilling a gap in the purpose of the crack and slowly drag the bit down its length. Swab gone the residue with some alcohol.
2. Avail massive 60-grit sandpaper to sand the inside and elsewhere of the fender. Sand one inch ended the gone of the patch environment. Utilize a crosshatch sanding decoration, sanding at 90-degree angles. Rugged up the plastic surface with abyssal grooves. Sponge the fender down with the plastic cleaner (from implements) or custom alcohol. Let the fender air dry.
3. Cut a piece of fiberglass mat that will cover the crack and overlap the drill holes by at least 1/2 inch. Prepare the adhesive according to directions and pour enough of the contents into a cup to fill the entire crack, with an extra amount to use for buildup.6. Turn the fender face up. Use a flat file or sanding block with 60-grit sandpaper to sand the surface down until you reach just above the fender height.
Turn the fender over and fill in the crack gap with repair plastic. Smooth it out with a putty knife, shoving down hard to remove all air bubbles. Build up an extra layer of repair plastic beyond the height of the fender surface. Let dry according to instructions.
5. Flip the fender over, backside up. Remove the blue tape. Cover the fiberglass mat with a thick coat of repair plastic, smoothing it down with the putty knife. Leave a thick buildup area of extra plastic putty. Let air dry.
Soak the fiberglass mat in the adhesive mixture and lay it flat over the crack on the underside of the fender. Use some blue masking tape to secure it tightly against the fender, but do not cover the fiberglass mat entirely with tape--only the outside edges. Let dry.4. Use fine sandpaper (400-grit) to finish sanding the surface down until it becomes even with the fender surface and contour. Paint to match your fender's color, as needed.
