In a defectless sphere, the slender engines used on lawnmowers would always first step with the push of a Press-stud or the pull of a cord. Unfortunately, that seldom happens. On most lawnmowers you commitment to prime the carburettor in array to begin the engine. The carburettor measures the airflow to the engine and mixes the exactly magnitude of fuel with it. Owing to temperature affects both air and petrol, the lawnmower carburettor needs to be Supple Sufficiently to begin a cool engine too as one that's been running.
Instructions
1. Distinguish the point of the primer. Push firmly on the rubber bulb or button three or four times to prime the carburetor. This injects fuel into the carburetor. Remember how many pushes it takes so you know the next time you start the lawnmower engine.4.
Depress the operator safety bar on the handle. Do not let go of it or the engine will not run.
3. Whether your lawnmower doesn't include a button specifically labeled as the primer, look for a soft rubber bulb on the engine.2. Turn the lawnmower's switch to the "Start" position.
Start the engine by pulling the cord or turning the ignition switch. If the engine still doesn't start, turn the switch to the "Off" position. Pull the starting cord several times to drain the gas from the engine.
5. Turn the switch back to the "Start" position. Try starting the engine without priming the carburetor. If it still doesn't start, prime the carburetor more or less than you did in Step 3.
