Thursday, June 11, 2015

Clean Duramax Injectors

Affliction your fuel injectors Disinfected is the fundamental to maintaining your Duramax engine's performance. Clogged injectors not exclusive contribute to lowered fuel economy, they besides shorten the bigness of influence your Duramax engine is able to constitute. The closest development lets you Disinfected the injectors in a transaction that is exceeding conduct than adding injector cleaner into the fuel receptacle. A fix of double time disconnect tools are required for this mode.


3. Mix 1/2-gallon of clean diesel fuel with 13 ounces of injector cleaner in a large clean container. Place both fuel lines into the container and set it a safe distance from the engine and any other heat source.



2. Connect a long length of 3/8-inch diameter rubber fuel line tubing to the return line and 1/2-inch diameter fuel line tubing to the suction line. Use hose clamps to secure the connections. You will need at least eight to ten feet of rubber fuel line.


Instructions

1. Disclosed the hood and place the 3/8-inch breadth repay border and 1/2-inch calibre suction lines at the rear of the engine. Practice a fix of agile disconnect tools to disconnect these lines.


4. Start the engine and let it idle for as long as the fuel supply in the container allows. When the container is empty, turn off the engine and remove the lines from the container. Remove the hose clamps and disconnect the rubber fuel line tubing from the suction and return lines.


5. Reconnect the return and suction lines to the injector rail. Start the engine and check for leaks. Close the hood and shut off the engine when finished.