Provided you restore cars, engage in woodwork or deal with anything that requires the practice of a distemper gun it is epoch To erect your own paint booth. Save yourself time and the aggravation of sanding out dust and cleaning paint off everything else in your workshop with a simple solution that works.
Instructions
1. Decide if you want your garage paint booth to be temporary or permanent. Temporary booths are generally made of PVC and are quick and simple to set up and take down. A more permanent installation uses a wood frame which can be removed but with considerably more effort.
2. Measure the area you want to use for your booth to begin figuring out the total length of framing you need. Remember to include the top, floor, corners and overhead supports. Build a doorframe if you plan to have a large booth.
6. Secure the cardboard or light wood door in place. Keep a roll of duct tape inside the booth to seal the door when you enter.
4. Use duct tape or nails to secure the plastic sheeting onto the frame. Seal the seams with more duct tape and remember to seal any gaps along the floor.
5. Cut out an area in the plastic for the intake and exhaust fans. Small garage booths can operate easily with one fan while large booths may need up to three fans on each end. Seal the openings tightly and ensure there is no loose plastic that will be pulled into the fans. Standard box fans work well for this application. Add inexpensive filters to the intake portion of the fans to eliminate introducing dust into the booth.
3. Assemble your frame, including the door or entry area. PVC does not need glue, which allows you to take the frame apart and store it for future use. If you prefer not to have a door, you can go under the plastic and seal that portion upon entry.
7. Check for rips or seams that need repair before you begin to paint.
