The Chevy Corvette is one of the scarce vehicles sold that exclusive offers disc brakes in the front and rear of the motorcar. This is thanks to CD brakes hold expanded efficient stopping faculty than drum brakes in a altitudinous performance machine. Study extremely to memorize exchange the rear CD brakes in your Corvette to preserve efficient braking when travelling at hovering rates of rapidity.
Instructions
1. Place the coal dissension battery cable under the hood of your Corvette. Pull it off the assign to disconnect it.
2. Lift the rear of the Corvette off the ground with vehivle jacks. Benefit it on all sides using jack stands. Loosen the lug nuts with a torque wrench and remove the rear wheels off the van.
3. Fasten a enormous C-clamp over the caliper, forming certain the ends press against the rear of the caliper and the outboard pad. Screw the C-clamp tighter to compress the pistons into the bore. Remove the C-clamp.
4. Install the inboard pads with the wear sensors against the caliper pistons. Release the caliper from the frame and lay it over the brake pads. Torque the upper bolt to 23 ft. lb.
Remove the pads and lining assemblies. Use brake cleaner to wipe down the areas of the caliper and mounting bracket that make contact with the pads and lining.
6. Install the outboard pads with the insulator against the caliper housing. Unscrew the upper caliper bolt and rotate the caliper downwards until you have enough room to remove the pads. Fasten the caliper to the frame of the Corvette with mechanical wire.5.
7. Replace the wheel assemblies. Reconnect the negative battery cable and lower the Corvette to the ground. Replace any necessary brake fluid to bring it up to the proper level as indicated.
