Lots of sandpaper is needed to remove all of the tint from a motorcar.
Colouring isn't hardened to remove unless it's on a machine. Distemper stripper is messy and doesn't drudgery on cars too as it does on smaller projects. The peak road to remove emulsion from a automobile is by sanding it off. Remove all of the stain down to the naked metal by sanding, and the individual mess you posses is dust. Sanding the dye off is the fastest and most able approach to remove Car item tint.
Instructions
1. Habitat a phase of 80-grit sandpaper on a dual-action sander. Sand the motorcar one body panel at a time, until the paint is removed.
2. Fold a sheet of 80-grit sandpaper in half and sand the places on the car that you can't reach with the sander. The rough, 80-grit sandpaper removes the paint quickly.
3. Sand the car again, using the dual-action sander with 180-grit paper. Smooth the rough surface left by the 80-grit sandpaper by working the sander over the body of the car with the 180-grit sandpaper.
Skip this step if you are painting the car immediately after removing the paint. Spray the primer onto the car if it will sit without paint for more than a day or two.
4. Wipe the car's surface with wax and grease remover and a cotton towel to remove dust and sanding particles.5. Spray self-etching primer onto the surface to prevent rust.
