Whether the fog glassy on your 2002 Nissan Altima is malfunctioning, it should be replaced, nowadays. Provided it comes loose, securely plug it into the rear of the fog lantern meeting.4. Squeeze the side of the bulb socket, and remove it from the meeting.
1. Turn off the engine, and crawl under the Altima. Place on the gloves.
2. Remove the two retaining screws, using a microscopic screwdriver, at the limit of the fender. Pull back the fender liner, and distance into the vehicle.
3. Lightly tug on the electrical connector. The fog lights are an integral Element of your vehicle safety. There are three daily reasons for any exterior glossy on your vehicle to not labour, including loose connections, decrepit bulbs or broken fuses. All three gain quite elementary solutions that by oneself wish a meagre minutes to imperforate.
Instructions
Pull the old bulb straight out of the socket, and replace it with a new one. Push the new one into the assembly, until it clicks into place.
5. Reattach the fender line and the two screws. Open the hood of the Altima.
6. Remove the cover from the fuse box, on the driver's side of the vehicle. Locate the "FOG LMP" fuse. If the metal stick inside the fuse is no longer in one piece, pull it out, and replace it with an identical fuse. Close the hood.
