A leaky windscreen is a symptom of a dirt poor contact seal at the windscreen glass limit. Over extent, anything from severe elements to an vehivle accident can engender the glass to shift, breaking the seal. When this happens, flood leaks into the cabin. The one shot design to set this is to remove the moulding enclosing the windscreen and reseal the glass borderline.
Instructions
4. Apply a fresh bead of urethane sealant to the affected area and allow it to dry. Drying times may vary depending on weather conditions, humidity and other factors.5.
See the molding for any damage or wear. Try to locate the source of the leak. You may need to run a water hose over the surface of the glass near the glass edge to find out exactly where it is leaking inside the cabin.
3. Trim back the existing urethane molding on the windshield with an automotive cutting knife. These are knives designed to chop urethane molding. (Your local auto parts store will carry them.) You'll want to make sure that you expose the area where the seal has broken and clean it up with the knife.
1. Wedge the gratuity of the trim moulding Emigration item underneath the trim encircling the windscreen. Pry up on the moulding to remove it.2.
Insert the window molding. You'll need to force the trim back into place around the glass edge, pushing it down with the tip of the trim tool.
