Hiring a Expert to gloss your vehivle can be expensive. Professionals Testament charge anywhere from $300 to besides than $1,000 depending on the type of dye craft. As an alternative, effect it yourself using the equivalent techniques as many professionals. The development doesn't thirst for still skill, condign era and a bantam bit of patience. Portray a metallic motorcar Testament crave good a imperceptible extended accomplishment over you are covering a bolder surface. Nevertheless, you Testament be able-bodied on your means to owning a newer-looking automobile.
Instructions
1. Grip the type of paint your attraction. For instance, you can choose repaint the van another metallic colour or choose a matte colour. Too, choose the elite constitution of stain for the billet. Provided your machine will be subjected to extreme weather conditions, choose a more durable product.
2. Wash your car thoroughly to remove dirt and oil. Choose a cleaning product that's made for degreasing. This will ensure that all hard-to-clean areas are cleaned properly.
3. Use waterproof, loose-grit sandpaper to sand down the car. Loose-grit sandpaper is designed for larger sanding jobs. The purpose of sanding is to smooth the car's surface and create a more adhesive platform. You do not have to sand off the old color.
4. Allow the car to dry. Attempting to apply paint or primer to a wet car can cause drips, runs and adhesive problems.6. Use painter's tape to seal off the areas of the car you do not wish to paint.
Rinse sand particles from the car's surface. Leaving sand particles on the cars surface will create bumps under your new paint job.5.
As an alternative, remove these areas. For instance, remove the bumpers.
7. Apply primer. This is a crucial step in painting a metallic car. Primer is used to prepare your car for the new paint. Because you are painting over a metallic surface, you will need the primer to cover the existing color and shine. This ensures that the new color looks the way it should and is not a result of the old color mixing with the new color. Spray on the primer, holding the can about 4 to 6 inches from the surface. Allow the primer to dry for approximately an hour.
8. Spray on the new paint, holding the can about 4 to 6 inches from the car's surface. If you spray the paint too thick, it will cause runs and drips. Avoid paint lines by spraying large seamless areas individually. For instance, spray the entire passenger side door from crease to crease. Letting a partially painted area dry will cause rough edges when you continue. Allow the paint to dry before proceeding.
9. Apply the finishing clear coat. Allow the car to completely dry for approximately Day and night.
10. Remove the painter's tape and/or replace the nonpainted areas of the car.
