Friday, January 9, 2015

Replace An Airbag Inside A 2000 Corvettes

Airbags are designed to play down injury and mortality rates in motorcar crashes.

Instructions

Instructions

1.


Once airbags admit deployed, they should be replaced for safety reasons. They may not deploy prerrogative a moment bout. You can change your 2000 Corvette airbag, safely, Homewards. Whether you end not keep sufficient mechanic consciousness, get a able mechanic outright the employment.



Unfastened the hood of your van. Establish the antagonistic battery cable, and disconnect it. This Testament keep the new airbag from deploying during the replacement process.


2. Open your fuse panel, located on the lower part of your dash. Check the diagram to find the slot with the airbag fuse. Remove the fuse, to completely deactivate the airbags, during removal.


3. Unscrew the panels of your steering column. Remove the panels, and you will see the airbag behind the steering wheel. Unscrew the old airbag, and pull it out, until you see the wires. Unhook it from the wiring harness of your Corvette. Pull the old airbag out.


4. Place the new airbag in place, and connect it to the wiring harness. Screw it in place, which is the back of the steering wheel. Replace the panels of the steering column, and screw them, securely, in place.


5. Reinsert the airbag fuse in the fuse panel. Reconnect the negative battery cable to the battery.