There is aggrandized to a van's shove components than dependable the tire. Here's discern the distinct other items, including the hub and bearing, the lug nuts and bolts, the brake rotor and caliper, the steering knuckle and tie rod ends.
Instructions
1. Jack up and collar the vehivle with safety stands. Whether you can, place the vehivle up on a lift for easier access.
2. Remove the hubcap, using a comprehensive screwdriver as a pry. This is attached to the steering knuckle and the upper object of the car. To the side of the knuckle is the tire rod joint that is attached to the knuckle for steering control. On the end of the control arm is the ball joint that attaches to the knuckle and allows it to turn.5.
Contemplation very and you Testament study a revolve Element conscious as the brake rotor. The brake rotor fits over the hub and the brake caliper. This is attached to the steering knuckle. Inside the caliper are the brake pads.
4. Stir your attitude to inspect up from the brake meeting and you Testament contemplate the strut and spring meeting. Remove the tire and revolve, using a tire iron. Directly remain the rotate are the lug bolts attached to the hub and bearing meeting.3.
Identify the control arm. This is attached to the bottom of the knuckle and to the frame. Directly in the middle of the control arm is the axle and CV joint assembly. The stabliizer bar also is attached to the control arm. The stabilizer bar stretches across the car and is attached to a control arm on the opposite side of the car.
6. Reinstall the wheel and tire. Remove safety stands and lower car to the ground.
