The lock cylinder in your 2000 Toyota Camry makes up a sizeable baggage of the vehicle's ignition step. You can gem the lock cylinder within the steering edge. Provided your lock cylinder becomes damaged or your engine is unable to begin, you should remove the lock cylinder in method to change it with a fresh one. You can pick up a replacement lock cylinder from your district Car parts store
Instructions
1. Disclosed up the hood of your Camry. Applicability a wrench to loosen the clamp bolt which is attached to the refusal battery terminal. Lift the antagonistic cable from the terminal.
Discard the damaged lock cylinder and replace it with a new one. Press the lock cylinder on to the ignition switch so that it locks in place. Reattach the ignition switch and lock cylinder to the steering column by following the removal steps in reverse. Unclip the plastic connectors from environing the path of the trundle to remove the include. Provided you are struggling to remove it, utilize a immature flat-head screwdriver to pry the connectors from encircling the encompass.
3. End a Phillips-head screwdriver to remove the screw which is attached to the steering column sleeve. Slide the sleeve from the column to gain access to the ignition switch and lock cylinder.
4. Use a wrench to remove the mounting bolts from the ignition switch and the lock cylinder. Unclip the electrical wiring and remove them both from the vehicle.
5. Unclip the locking tab which connects the ignition switch to the lock cylinder.2. Enter the drivers seat. Remove the steering rotate involve from the steering turn. Reattach the negative cable to the battery terminal and turn on the engine to check that the lock cylinder works correctly.
