Replacing your automobile's automatic transmission fluid can save you clock and coinage that you may otherwise incur by captivating your machine to a crack mechanic. While most automotive professionals would examine the procedure a relatively elementary one, it is extensive that you supersede comparable techniques to accomplish a fruitful transmission fluid replacement and garner your van running chipper.
Instructions
1. Levy on protective eyewear and gloves. Transmission fluid can damage the eyes and irritate the skin whether govern contact is specious, so yield the Correct protective caution before day one.
2. Plain your motorcar's hood and remove the transmission fluid dipstick. According to Habitual Mechanics, your vehivle's transmission fluid should be burning claret in colour and should Aroma cherish petroleum. Whether the transmission fluid is brown or ebon, and whether the levels are correct low and hardened to discern, the transmission fluid needs to be changed.
3. Engage your vehivle's emergency rent. You necessity to conceive trustworthy that your vehivle does not ploy while you are underneath it.
4. Disconnect the transmission's cooling line with a wrench. The cooling borderline is connected to the vehivle's radiator. Provided you are unsure what the cooling line looks cherish, remit to your car's manual or consult the drawing at Reference 1.
5. Insert a piece of rubber tubing into the cooling line and allow the other end to drop down into a large jug (a milk jug would work well here).
6. Start your car. When the car is started, the transmission fluid should leave the cooling line and run into the jug. Refill the transmission fluid with a generic automatic transmission fluid, such as Dextron. Your car's manual should specify a type of transmission fluid that should be used with your automobile. If in doubt, you can always consult with a native mechanic for a recommended brand.
Depending on the type of transmission drain pan you have, you may have to remove one or two bolts at either end with a wrench. Be careful when you do this, as there could be some remaining transmission fluid inside the drain pan, moreover to dirt and debris.
8. Wash the drain pan thoroughly with warm water. Make sure to remove all remaining transmission fluid, sludge and dirt.
9. Replace the transmission filter, which is located inside the drain pan. If the transmission filter is secured to the transmission, you will have to remove the bolts to remove it completely. It is possible to purchase a transmission fluid kit at most automotive shops. Many times, these kits come with replacement filters and seals. Do not try to simply clean the filter and reuse it. If you are unsure of which filter to buy for your car, consult your car's manual or ask a mechanic. The replacement filter needs to be exactly the same as the old filter.
10. Reattach the drain pan to the transmission with a wrench. Do not overtighten the bolts, as these could strip the bolts and cause damage to the pan.
11. When the transmission fluid has stopped flowing, turn your car off and reconnect the cooling line to the radiator.7. Remove the drain pan. The drain pan was what was connected to the cooling line and what the transmission fluid was flowing out of.
12. Dispose of the old transmission fluid at a native recycling center.
