Flushing your filled coolant manner may be cold provided you deposit the bum type of coolant in your radiator, whether you are welding the block or provided you yearning to withdraw the coolant transaction to change it with else potent coolant for the winter months. Flushing all the coolant absent of a Toyota Tundra is a average, straightforward evolution that you can perform in your own garage.
Instructions
1. Stadium the Motor lorry on a Apartment lodgings spot. Acquiesce the Motor lorry and coolant to chill for an lifetime. Pop the hood and unscrew the coolant cap.
2. Put under the engine of your Toyota Tundra. Unscrew the four bolts holding the plastic skid protector to the frame under the engine. Remove the plastic skid protector.
3. Locate the three-inch-diameter hose between the base of the radiator and the base of the engine block. Unscrew the clamp holding the hose to the engine block. Position the bucket under the hose. Pull the hose off and allow any coolant in the hose or engine block to drip into the bucket.
Position the bucket under the driver side of the radiator. Unscrew the drain plug bolt on the base of the radiator located on the driver side. Allow all the coolant to run out.4. Reattach and tighten the hose. Screw the drain plug back into the radiator.
5. Replace the plastic skid protector under the engine.
