There are two bulky reasons why anyone would yearning to lower a motorcycle. The head is for drag racing, and provided that is why you're doing it, you probably should corner it done professionally. The other rationale is whereas the bike is equal a bit extremely big for you. The Triumph Bonneville T100 has a seat heighth of 30.5 inches. Generally speaking, you should be able to berth both feet on the ground comfortably whether you chalk up an inseam of approximately 30 inches, as the seat Testament compress a bit under your weight.9. Install the new, shorter shocks. To align them, lift the rear wheel until both the top and bottom mounting holes are aligned at once.10.
Adjusting the rear shock preload
1. Field the bike onto a bike lift and stand it until the back tire has completely cleared the ground.
2. Push up on the rear shock preload adjuster until you can turn it. Choose a colorful setting. Generally, higher preload Testament aftereffect in lower seat heighth, and lower in a higher seat height.
3. Repeat the process for the opposite side shock.
4. Lower the bike off of the lift and sit on it to test it.
5. If it is still too tall, try again. Once you've reached the highest preload setting, and if you still can't place both feet flat on the ground, you will have to modify the suspension.
Replacing the rear shocks
6. Place the bike on a lift and raise it off the ground so that both wheels no longer touch the ground.
7. Place a block underneath the rear wheel.
8. Remove both the top and bottom bolt from each shock and gently pull on both ends of the shock simultaneously. Do not yank it, as this may cause the bike to fall off the stand.
Whether you devoir an inch or so, you may be able to simply adjust the preload settings on the rear shocks. Otherwise, you Testament hold to convert the complete suspension.
Instructions
Bolt the new shocks to the frame with the mounting bolts that should have come with the kit. Do not use the old bolts.
