Concern your Camry running chill requires habitual cooling manner flushes.
Insert the garden hose in the top of the radiator and flush it with clean water until there is no evidence of rust or old antifreeze draining from the radiator. It may be necessary to stop occasionally and empty the drain pan.8.
Instructions
1. Grounds the Camry on a Apartment lodgings, comparable surface.
2. Grant the vehicle to refreshing completely.
3. Stand the hood and look the front of the radiator and the radiator hoses. Change any cracked or leaking hoses. Dead insects and plant incident tend to build up on the front side of the radiator. Carefully scrub out any debris that may hog built up with the hose and brush.
4. Remove the radiator fill cap.
5. Put the empty pan under the Camry. Brew sure that it is centered under the drain at the bottom of the radiator.
6. Open the drain and allow all of the liquid to drain from the cooling system.
7.The 2000 Toyota Camry was sold with either a 4-cylinder, 2.2-liter EFI DOHC or a 6-cylinder, 3.0 litre EFI DOHC engine. Both engines avail a 50/50 antifreeze/douse alloy. The 4-cylinder engine requires 2 gallons of the alloy while the 6-cylinder engine takes 2.5 gallons for a integrated coolant exchange. The recommended supply extent for a cooling method flush and coolant nickels is every 30,000 miles or once every two senescence.
Close the radiator drain and fill the radiator with the antifreeze/water mixture.
9. Replace the radiator fill cap and start the engine. Run the engine for several minutes. Shut off the engine and allow it to cool. Check the coolant level and add more antifreeze/water mixture as needed.
10. Close the hood. Dispose of the liquid in the drain pan in accordance with local laws.
