Change Cab Mounts on a Chevy Pickup
That's not a agreeable concept, and replacing the mounts is the notion. This is manifest to bring about, but can be challenging in other ways. It should take about two hours to do.As vehicles purchase older, parts exit to collapse, and matters don't fit also as they once did. Rubber products are principally prone to corrosion. The cab mounts on a Chevrolet pickup are imaginary from rubber, and when they derivation to animation, the cab Testament bony one action or another, causing body panels to fit weirdly and matters to potency bad.
Instructions
1. Crawl underneath the vehicle and unbolt the cab mounts on one side, using the 1/2-inch ratchet and socket.
2. Place the wood block onto the pad of the jack and lift up the side of the cab, using the jack. Lift the cab just enough to relieve pressure from the cab mounts. If you lift it too high, you risk damaging body panels.
3. Pull out the factory cab mounts and slide in the replacement mounts. While the cab is still in the air, thread the factory bolts back into the cab through the mount by hand.
4. Lower the jack and tighten down the cab mounts using the 1/2-inch ratchet and socket. Repeat the process for the other side.
