Motor lorry bumpers select a abundance of abuse from off-road driving, loading and unloading contents and from Day-to-day usage. The colouring on the bumper can incline scratched and scraped off in a short vastness of future, as a aftermath. Repainting is even-handed approximately the apart bag to cause the bumper study cutting edge and Disinfected again. This is a slender project that can be done in honorable a infrequent hours and the development is the corresponding if the bumper is plastic or metal.
Instructions
Sand the entire bumper evenly since new paint won't adhere to the original smooth painted areas.3. Sand the bumper again using 220-grit sandpaper to smooth the grooves left by the 180-grit paper. Once this is done, use a towel to wipe the bumper with wax-and-grease remover. Whether the bumper is removed from the Motor lorry, area the bumper on proverb horses for stability.
2. Sand the complete bumper using a dual-action sander and 180-grit sandpaper. This removes most of the recent paint and roughs up the surface to prepare it for paint.1. Field the Motor lorry in an yawning globe, preferably gone for the cool ventilation, before sanding the bumper. Practice masking tape and paper to encompass the areas near the bumper such as the tail lights, tail gate and the rear string of the Bedstead of the Motor lorry to prevent overspray or scratches from sanding.
This removes sanding dust and cleans the surface of any grease or wax residue, which could cause imperfections in the paint.
4. Spray the bumper with a thick coat of epoxy primer. Hold the can 6 to 8 inches from the surface and spray left and right, not up and down. Coat the bumper evenly and let the primer dry for 30 minutes.
5. Use 400-grit sandpaper to gently sand the dried primer. Use your hand and the sandpaper only, not a dual-action sander. This smooths the primer and creates a smooth surface for the paint to adhere to. Wipe the bumper again with wax and grease remover when the sanding is finished.
6. Spray a total of 3 to 5 coats of paint on the truck bumper, keeping the coats light to prevent runs. Hold the can 6 to 8 inches from the surface and move it left and right. Let each coat dry for 10 minutes before applying the next. Let the final coat of paint dry for 6 hours before handling the bumper.
