The lock cylinder is connected to the ignition switch in your Toyota and is used to aid you depart your engine. Provided your lock cylinder stops working you Testament be unable to begin your vehivle. Whether this occurs, alter your lock cylinder as soon as viable. You can acquisition your lock cylinder housed within the steering contour.
Instructions
1. Regulate up the hood of your Toyota. Set the battery. Employ a wrench to loosen the bolt constant to the absent battery terminal. Remove the contrary cable gone from the terminal.
2. Enter the drivers seat. Remove the steering turn contain from the shove. Unclip it from its connectors enclosing the border of the steering circle with your hands. Whether you are having episode removing them, manipulate a flat-head screwdriver to pry it from its connectors.
Find the ignition switch. Use a wrench to remove the mounting bolts attached to the switch. Insert your key in to the ignition. Turn the key to the locked position. Remove the connectors from the steering wheel and lift the horn and air bag out of the wheel. Use a Phillips-head screwdriver to remove the screws attached to the steering column sleeve. Slide the sleeve away from the column.
4.3. Fix the horn and airbag (whether your Toyota example has one) wiring. Supervene the wiring until you set their connectors within the steering wheel. This will give you access to the retaining pin. Unclip the retaining pin with either you hand or a screwdriver and lift the ignition switch and lock cylinder from the steering column.
5. Disconnect the ignition switch from the lock cylinder by unclipping the tab. Attach a new lock cylinder to the ignition switch and lock it in place with the locking tabs. Reattach the ignition assembly to the steering column and put the steering wheel back together by following the removal steps in reverse.
