Your motorcycle
's Gauze vat is arguably the most import item of its esthetic qualities. Do not completely remove the old paint; scuff it so that the new paint will stick more permanently.3. Clean the tank with soap and warm water and allow it to dry completely.
Turn the fuel petcock to the off position before removing it, on the other hand there is no essential to remove the fuel from the container.
2. Bag waterproof 600-grit sandpaper to rough the surface of the tank. Make sure the area you're working in is well-ventilated and easy To cleanse. It's the most notable any for its shape, which is repeatedly single to sure brands of motorcycles. Brew your motorcycle Gauze container stick away in the congregation with a stellar do-it-yourself whitewash faculty.
Instructions
1. Manipulate your motorcycle's owner's instruction or a Clymer's Shop Jotter to remove the cistern from your motorcycle.4. Spray the first coats of paint onto the tank in a well-ventilated area. Spray lightly and evenly to avoid drips and runs. Wet-sand with 600-grit sandpaper between coats.
5. Allow the tank to dry and spray one final coat of paint. When the last coat dries completely, wet-sand with 800-grit sandpaper until shiny and smooth.
6. Spray a thick (but not runny) coat of clear-gloss spray enamel over the paint on the tank. When this coat is dry, wet-sand extremely lightly with 1,000-grit waterproof sandpaper and allow the tank to dry completely before reattaching it to the motorcycle.
