Vent windows are brief triangular shaped pieces of glass that are create in the front corners of cars. They are fly abutting to the front windows and were all the more exceeding public in older cars. These windows can bare To admit some new air in without having to roll down the bulky window. Installing a vent window in a 1964 Volkswagen chase the duplicate directions as installing a vent window in any other vehicle.
Instructions
1. Remove the door panel from the side of the motorcar where the vent window Testament be installed. Set the window into the opening and push down firmly so it can slide into the trim and adhere in place. Clean up any excess cement with a clean rag and wait one hour for the cement to set in.5.
Receive the door panel with one fist on Everyone side and carefully pull up to remove the panel and pop off the rivets holding the panel in corner. Allot the panel off to the side. Peel off the stage of plastic that is protecting the inside of the door. Pull off from corner where the window is located good Sufficiently so it can be installed.
3. Disinfected the frame and the area where the window will be installed. Wipe it with a clean rag to make sure there is no dirt and debris in the way. Inspect the window trim to make sure it is in good shape and is secured to the frame of the car.
4. Run a bead of rubber cement along the edge of the trim with a caulk gun. Loosen all of the screws holding the door panel in abode with a Phillips purpose screwdriver. Establish them aside for forthcoming utilize. Pop off any covers over the window cranks and door handles with a Apartment lodgings tendency screwdriver.2.
Attach the plastic cover back in place and reinstall the door panel in the reverse order that it was removed. Test out the window after waiting Day and night. Raise it up and down to make sure it is working properly
