Get properly pocket money your IAC valve.
The slothful air administration valve is an extensive Element within your vehicle. The IAC valve works to determination the bigness of air that bypasses the throttle plate. This formation maintains comprehensive lazy rush. It's essential to memorize allot and alter the valve in the chance of failure. This Testament save you future and means by avoiding a costly mechanic and doing the business yourself.
Instructions
1. Grounds the vehicle and turn the engine off. Remove the interpretation from the ignition. Remit the vehicle to sit for a half hour to ensure all components cool properly.
2. Open the hood of the vehicle. Reconnect the negative battery cable. Close the hood of the vehicle.
3. Unplug the wire harness connected to the valve. Use the appropriate screwdriver and the two retaining screws that hold the valve in place. Lift the valve off the throttle body and discard along with the old gasket.
4. Use throttle body cleaner and a rag To cleanse the valve's mounting surface. This will ensure a proper connection.
5. Align the replacement IAC valve and gasket on the throttle body. Replace and tighten the two retaining screws. Connect the wire harness to the new valve to complete the replacement. Disconnect the negative cable on the battery. Locate the IAC valve. The valve is found secured to the throttle body and can be identified as a three to four-inch cylinder type component. Refer to the specific year, make and model repair manual for the exact location and a diagram.
