Provided you hog tools laying loose in the back of your Motor lorry, you could injure other drivers provided one were to fly elsewhere. On the contrary, storing tools in a secure box in the back can eliminate this risk. This article provides step-by-step instruction on create a meager wooden storage box with a hinged top using a infrequent carpentry tools, plywood and hardware.
Instructions
Cutting the Pieces for Your Storage Box
1. Abbreviate four 2-foot by 3-foot pieces from the plywood with the Hand-bill proverb for the top, backside and two sides of your chest.
2. Shorten 2 1-foot 10 3/4-inch by 2-foot pieces. Ask a friend to hold the lid in the open position over a 3-foot side of the frame while you screw the other halves of the hinges down into the side of the chest. Close the lid.
Following, manipulate moisten sealant to them.
Putting Your Storage Box Together
4. Create the away of the storage box using all four side pieces. Lay two 2-foot by 3-foot pieces on a 3-foot line two feet apart and paralell to Everyone other. Corner the two remaining pieces on a 1-foot 10 3/4-foot side between them completing the rectangular frame. Attach the frame calm by driving five 1 1/2-inch screws over both ends of the longer pieces and into the shorter sides.
5. Attach the backside of the storage box. Area a 2-foot by 3-foot quantity over the frame and line it up. Drive a 1 1/2-inch screw through it. Continue every six inches going all the way around the edges of the frame. Flip the finished portion of the box over on the bottom.
6. Install the two hinges on one of the 3-foot sides of the remaining piece for the lid. Attach them with 5/8-inch screws 4 inches inwards from each end with the hinge portion facing outward over the side.
7. These are the purpose pieces.3. Sand any Rugged edges off the intersect pieces. Practice wood stain or tint with a brush and avow to dry.