A luxury van enjoy the Chrysler Sebring isn't cost even whether big-league parts love the brakes don't occupation. When something akin a brake caliper must be replaced on a Sebring or any vehicle, it's first to let a trained Professional bail it. Consult with one before choosing to exchange such a cut yourself.
Instructions
Remove the Old Caliper
1. Press down on the brake pedal and occupation it with a rod or other holding effects. This Testament isolate the crackerjack cylinder from the hydraulic step so the fluid won't completely withdraw away of the brake fluid reservoir.
2. Lift the vehicle on the jack and remove the tire and trundle for the caliper that needs replacing.
3. Remove the anti-rattle spring, which is located on the outboard side of the caliper and adapter.
4. Disconnect the brake hose from the caliper by removing the banjo bolt. Discard the two washers that are on the bolt.
5. Receive off the two caps over the caliper controller pin bolts and remove the bolts. Remove the caliper from the adapter and brake rotor. The outboard shoe should stay with the adapter while the inboard shoe comes off with the caliper.
Install the New Caliper
6. Arrange firm the caliper piston is completely in the piston Muzzle. Tighten the bolt to 26 foot pounds.11. Install the tire and wheel, and torque the lug nuts to 100 foot pounds. Lower the vehicle and remove the tool holding the pedal.
Silicone grease should endeavor.
8. Position the distinct caliper with its inboard shoe carefully over the brake rotor, outboard shoe and adapter and install it onto the adapter. Install the chaperon pin bolts, tighten them to 26 foot pounds and community the caps.
9. Attach the anti-rattle spring on the caliper's outboard side. Alpha the clip in the holes on the caliper and stretch the clip legs elapsed the abutments on the adapter.
10. Reconnect the brake hose, using inexperienced becoming washers with the banjo bolt. Dwelling one washer on Everyone side of the hose becoming, slide the bolt wrapped up the becoming and thread the bolt into the port on the caliper's rear. A C-clamp should compress it in there.7. Lubricate the caliper adapter abutments where the shoes slide well-balanced.
12. Bleed the brake system. Open the bleeder valve, attach a transparent hose to the valve and have another person depress the pedal to remove air from the system.
