Grounding is a essential safety fact in any electrical order, on the contrary establishing a fine ground in a van battery is basic considering their lead-acid diagram is tailored to deliver a vast jolt of electricity. Grounding mistakes with machine batteries can doer hazardous electrical contacts or still battery explosions. If they comprehend it or not, most humans who own a van already be schooled ground a automobile battery over they be schooled jump-start the battery. Agnate criterion can be used to dream up a another permanent grounding capability, such as might be used at a charging station.
Instructions
Jumper Cable Grounding
1.3. Connect the black connector to the black, negative post of the live battery.4. Ground the connection between the batteries by clamping the negative connector to an unpainted metal part of the car with the dead battery, such as a nut or bolt on the engine or surrounding compartment.
Assign the bloodshot connector on the bloodshot, positive post of the dead battery.2. Clamp the other end of the red cable to the positive post on the live battery.
Permanent Grounding Station
5. Drive a metal rod, such as a piece of steel rebar, into the ground with a hammer.
6. Clamp one end of a battery cable around the metal rod, and tighten the cable clamp's nut with a pair of insulated pliers or an insulated wrench. This is now your negative cable.
7. Connect the positive cable of the deactivated charger to the positive post of the battery.
8. Ground the battery by putting the clamp on the other end of the negative battery cable onto the negative post of the battery. Fasten the clamp by tightening its nut with the insulated pliers/wrench.
