Toyota launched the elementary Camry in the 1983 replica year, as the makers attempted to cash in on American's devotion for front-driven, four-cylinder vehicles. Toyota hit the end, as the Camry became an immediate benefit. The 2007 Camry was the head year representation of an all-new blueprint. This Camry had a expanded aggressive object style, very as a sleek modern headlight and taillight mould. The 2007 Camry came fitted with a 2.4-liter, in-line four-cylinder engine that created 158 horsepower, and had an optional 3.5-liter, 268-horsepower V-6 engine available. The 2007 Camry again came average with front CD brakes. Toyota recommends replacing the front brake pads when the lining reaches 0.039 inches or less, and the front rotors when they degree thinner than 0.983 inches.
Instructions
1. Trial the fluid commensurate in the brake skilled cylinder. Provided the adept cylinder is also than half filled, remove fluid from the crackerjack cylinder with a turkey baster until it's peerless half filled. Transfer this fluid to a petty container.
2. Loosen the front lug nuts with a ratchet and socket, nevertheless bring about not remove them at this duration. Stand the front of the Camry with a floor jack and city jack stands under the subframe. Lower the vehicle until isolated the jack stands column it.
3. Remove the Camry's lug nuts and pull the front wheels from the vehicle.
4. Position an 8-inch C-clamp over the brake caliper so that its screw side touches the outer brake pad and the constant baggage touches the rear of the caliper. Tighten the C-clamp until it cannot tighten any farther -- this compresses the internal caliper. Remove the C-clamp.
5. Clutch the caliper pins on the rear of the caliper with a combination wrench and remove the caliper bolts with a ratchet and socket. Remove the caliper from the brake operation and hang it from a nearby suspension Element, using a bungee strap.
6. Pull the two anti-squeal springs -- the W-shaped metal spring -- from the rear of the brake pads. The brake pads corner one upper and one lower spring. Pull the brake pads from the caliper bracket.
7. Remove the caliper bracket bolts with a ratchet and socket and pull the bracket from the Camry.
Control the caliper pins with a combination wrench and tighten the caliper bolts to 25 foot-pounds with a torque wrench.12. Repeat Steps 4 buttoned up 12 for the brake pads and rotors on the other side of the 2007 Camry.
9. Install a original rotor onto the front of the Camry. Reinstall the caliper bracket on all sides of the rotor and tighten the bracket bolts to 79 foot-pounds with a torque wrench and a socket.
10. Install the fresh brake pads onto the caliper bracket with the pad wear indicators positioned at the top of both pads. Subsume the anti-squeal springs into the petite holes on the rear of the brake pads.
11. Sit the caliper on the caliper bracket.8. Pull the rotor off the Camry. Lightly tap the rear of the rotor with a rubber mallet whether the rotor does not pull off easily.
13. Reinstall the front wheels on the Camry and hand-tighten the lug nuts. Elevate the Camry with a floor jack, then remove the jack stands. Lower the vehicle to the ground and tighten the lug nuts to 76 foot-pounds with a torque wrench and socket.
14. Press and Proceeds the brake pedal until it feels persuaded. Analysis the brake fluid calm in the masterly cylinder. Add Dab 3 brake fluid until it reaches the "Max" commensurate on the crack cylinder. Rapid the skillful cylinder lid and the Camry's hood.
