Convert the O2 sensors on your Chevy Baby.
The machine on your Chevy Crack uses facts from the O2 sensor and other components to arbitrate the top air/fuel ratio during engine process at any addicted mo. This helps lower harmful emissions and improves engine performance. Nevertheless, exhaust by products subsume and eventually interfere with Correct system of the O2 sensor over generation. If you demand to spending money one or deeper sensors on your Chevy Venture mannequin, application this controller to convert them.
Instructions
Remove the Oxygen Sensor
1. Initiate the engine and let it unused for three minutes to bring it up to operating temperature. then turn off the engine. You can remove the O2 sensor even easier with the exhaust transaction above 120 F (48 C).
2. Lift the front of your Chevy Venture using a floor jack and support it on 2 jack stands.
9. Lower the vehicle. It is called the upstream oxygen sensor. The downstream sensor is just after the catalytic converter, threaded on the back pipe.
4. Unplug the oxygen sensor electrical connector.
5. Remove the sensor using a box-end wrench or a ratchet and oxygen sensor socket.
Install the Oxygen Sensor
6. Apply a light coat of anti-seize compound to the threads of the new oxygen sensor. Keep the tip of the new sensor free of compound, dirt and other foreign particles that may interfere with the unit operation.
7. Start the sensor by hand on the exhaust pipe. Then tighten the sensor using the box-end wrench or ratchet and sensor socket.
8. Plug the oxygen sensor electrical connector.
3. Put on your goggles and locate the sensor or sensors you want to replace. You will find one on the front exhaust pipe, between the exhaust manifold and the catalytic converter.
