Alternate a Tailgate Helve on a Ford Ranger
The tailgate stock on a Ford Ranger is integrated into the tailgate fastening meeting. Whether one of the two steel supports that connect the grasp to the fastening begins to rust, then the holder may snap off and render the tailgate inoperable. Happily, replacing the tailgate haft/hasp on a Ford Ranger is husky within the mechanical abilities of most vehicle owners. You conscientious duty a infrequent elementary tools and an time or two.
Instructions
Removing the Tailgate Handle
8. Insert the new tailgate latch/handle into position in the tailgate frame.9. Screw in the two screws that secure the latch to the tailgate frame, using a socket.
Using your artisan, pull expanded the tailgate arm and lower the tailgate into a horizontal position.
3. Remove the screws that secure the tailgate access panel to the tailgate frame, using a Phillips screwdriver. The access panel is located on the inboard side of the tailgate.
4. Establish the driver-side tailgate bar release link. It will be secured to the latch by a plastic retaining clip. Rotate the clip upward, and then pull the link away from the tailgate latch, using needle-nose pliers.
5. Locate the passenger-side tailgate latch release link. It will be secured to the latch by a plastic retaining clip. Rotate the clip upwards, and then pull the link away from the tailgate latch, using needle-nose pliers.
6. Remove the two screws that secure the tailgate latch to the tailgate frame, using a socket.
7. Pull the tailgate latch from the frame and remove it from the vehicle.
Installing A Tailgate Handle
1. Engage the parking brake or block the rear wheels and tires, using wood blocks or spin chocks.2. Lower the tailgate.
10. Insert the passenger-side tailgate latch release link in the hole in the latch. Rotate the plastic retaining clip over the release link.
11. Insert the driver-side tailgate latch release link in the hole in the latch. Rotate the plastic retaining clip over the release link.
12. Slide the access panel cover over the the hole in the tailgate. Screw in the screws that secure the access panel to the tailgate frame.
13. Raise the tailgate.
