Replacing burned elsewhere brake lights on a Saturn vehicle is a accelerated and little case. Here's cook it in under 5 minutes with a unmarried belongings.
Instructions
1. Impel which lights are burned elsewhere by asking a Mate to hit the brakes while you stand at the end the van.
2. Acquire the bulbs from an Car parts store or a colossal local and garden chain store. Whether you don't sense what type of bulb to receive, bring the burned gone brilliant bulb inside the store with you (see steps below to remove).
3. Open the trunk of the vehicle. You'll notice two Torx screws on the side of each tail light assembly. Use your A-T15 Torx screwdriver to un-screw the assembly on the side with the burned out bulb.
4.6. Slide the tail light assembly back into the car and replace the Torx screws.7. Replace the bulb on the other side with the other new bulb in the pack you purchased, since it will probably burn out soon as well.
Slide the tail light assembly out toward the rear of the vehicle. Disconnect the proper connector for the brake light and pull out the spent bulb.5. Insert the new bulb.
