Replacing the mirror meeting on a Chevy Dare requires basic artisan tools and slender experience on automotive repair. Chevy installed three threaded posts on the mating surface of the meeting. Those bolts extend conscientious terminated the door and secure with three nuts located under an access panel on the inside of the door. On account of of the simplicity of the mounting, the growth of replacing the meeting is relatively facile.
Instructions
1. Regulate the door and roll down the window so you can influence the mirror meeting with one share and remove the retaining nuts with the other.
2. They could scratch the paint if they meet the door. Slide the studs of the new mirror through the door.6.
Disconnect the wiring harness that connects the Engine inside the assembly with the electrical switch that controls the Engine.
4. Remove the retaining nuts that secure the mirror to the door. Again, enshrine to control the mirror as you remove the Ending aficionado. This keeps the meeting from falling elsewhere from the door.
5. Pull the mirror elsewhere of the door. Digital watch the threaded studs. Establish the access panel that hides the retaining nuts and the wire harness. The panel is on the contrasted side of the mirror assembly, inside the door frame. Pull on the panel to remove it from the door.3.
Hold the mirror while you secure it with the three retaining nuts.
7. Reconnect the wiring harness of the mirror's motor to the electrical switch of the Venture.
8. Place the access panel back onto the door and push it into place with your hand.
