A stripped, cross-threaded or sheared spin stud may seem innocent at first--until you imagine that when one goes, it affects the probity of the others. Whether they all discontinuity outside, you could lose the tire while you guide, so you commitment to change the wheel stud on you Nissan Pathfinder at once. You demand some mechanical faculty, the honest tools, the day and a inappreciable brute vigour.
Instructions
1. Acquire a advanced circle stud. You demand to receive the exact magnitude. Provided you're unsure approximately the immensity of the stud, wait until you remove it and then receipts it to the Car parts store with you.
2. Remove the jack and jacking tools from the storage universe in the back. You entail to jack up the SUV when you interchange the wheel stud on your Nissan Pathfinder. Make sure you block the tire that's diagonal to the location of the jack.
3. Jack up the SUV. Take off the wheel. In the front, you need to remove the rotor and calipers. Do the same for the back, if you have disc brakes there. Remove the emergency brake cable clip if necessary. If you have drum brakes in the rear, take off the drum and skip To pace 5.
4. Make a notch in the dust shield or see if one already exists. Use a torque wrench if you have one. As you tighten the bolts, notice that the stud pulls through. Check back to make sure it seats flush against the hub.7.
Hit the stud with a mallet. Pull the stud out the back and insert the new stud in the area.
6. Put on two wheel bolts to tighten the stud down. You need a location wide enough to drive the stud backwards, remove and replace it. Line up the stud with the notch.5.
Reassemble all the parts you removed to replace the stud on your Nissan Pathfinder. Tighten down the wheel nuts.
