Grinding metal will lob off a abundance of sparks.
Metal Craft takes one of the hardest materials in our Diurnal lives and transforms it into surprising, graceful forms. While the totality of working with metal involves cutting, welding, grinding and polishing, the techniques of grinding obtain a goodly contact on the overall artistry of a lot. The grind determines the texture and contrast presented by Everyone group of metal. When grinding, you Testament call three leading types of disks: a cutting disk for slicing off barn door chunks of facts, a grinding disk for shaping and removing lots of metal, and a sanding disk for smoothing and adding texture to the metal.
Instructions
1. Clamp your metal firmly in levy. Never Celebrate the data by share for this can model to injury. Ideally, the metal you are working on Testament be at waist heighth while you are standing.
2. Smooth the metal with a sanding disk. Different grits of sanding disks will offer different results.
3. Abbreviate nailed down the metal by putting the disk wrinkle (and onliest the borderline) on the line and turning on the grinder. Slowly work the grinder through the metal letting the tool do the work. Don't press too hard; hold it firmly in contact with the metal. Reserve only the last, little cuts for the angle grinder. Make your major cuts with a saw or cutting torch instead.
4. Prepare to grind the edges and shape the metal with a grinding disk. Remove the cutting wheel and install a grinding disk. This disk is different from the cutting disk because you can use the edge and flat part, or belly, of the disk to grind the metal.
5. Use the edge of the grinding disk for small areas where you can't fit the belly and for marking out designs in the surface of the metal. Touching the disk edge to the metal will allow you to draw line-shapes on the surface of the metal. Use the belly to shape the metal, such as adding bevels to the edges and rounding corners.
6. Prepare to chop the metal to the shape you requirement. Attach a cutting disk to your angle grinder (consult your manufacturer's specifications for instructions on your particular grinder). Site absent the field you committal to chop off with chalk.
