Motorcar keys are needed to remove a basic switch
You may obligation to moderate the gloss switch or ignition switch on your Chevrolet when the vehicle has problems starting. The important switch on the vehicle sends an electrical word or in fashion to the starter to begin the engine. When the leading switch begins to fail, the starter Testament not collect this word and the vehicle Testament not inauguration. You can takings your Chevrolet to a mechanic or you can change the principal switch on your own.
Instructions
1. Fix the two screws that secure the insert of the steering borderline. These Testament be on the underside of the string.
Press on the new switch to lock it into the steering column.7. Set the steering column cover back in place and secure it with the screws to complete the project.
This is the position you reach before you start the vehicle.
4. Locate the access hole on the underside of the key switch and insert the punch pin into the hole.
5. Push on the punch pin and the pull out the key switch. Pull on the ignition key and the key switch will slide out of the steering column.
6. Insert the new key switch into the steering column.2. Remove the screws with a screwdriver and then pull the encompass off of the steering column.3. Insert the key into the ignition and turn it to the second or "Run" position.
