Plymouth's Voyager minivan allowed families to expedition in style and consolation when the vehicle was introduced in 1994. Successive discontinued in 2000, owners who pay for a used Voyager may be faced with performing a brief do-it-yourself prolongation to make certain their investment continues to propel in optimal process. Replacing the Voyager's fuel filter is one such effort owners may face, on the contrary catch alarm in doing so, in that the 1994 Voyager features an electric fuel pump that increases the chances of receiving unforeseen burns.
Instructions
1. Impel your Voyager onto a locate of ramps, establish the parking brake and chock the back tires. Extensive the hood on the Voyager and place the fuel pump's fuse box on the top side of the filter. Remove the fuse that controls the pump by gently pinching and pulling up on the fuse.4. Place the new filter in position and turn it to the right to tighten it into place. Replace any clamps that may have been included with your filter. Take the oil pan out from under the Voyager and replace the fuse in the pump.
Position your fuel pan underneath the filter To admit the fuel border to filter naturally, thus lowering energy in the pump. Sanction ample time for this, as excess fuel will splatter and potentially burn your skin.
3. Slide underneath the elevated vehicle, lay an old towel on the floor or ground to absorb oil runoff and turn the filter to the left until it comes loose. Pull and remove the old filter and place it in the oil pan. Check the fuel hose for cracks; if need be, replace it also, following the instructions included with your new filter.
Allot aside.2. Engender the engine and avow it indolent until the engine shuts off; turn the ignition to control the van and remove the crucial.
5. Turn the ignition to begin the engine. This will likely take three or four attempts as fuel filters back into the pump. Once the van starts, allow it run for a minute or two before removing the chocks and driving the vehicle off the ramps.
