The muffler and exhaust direct the babble alike down and wrinkle pollution.
An exhaust step can be replaced for various reasons; customization, performance and repair. The most relevant is repair--a defective exhaust action can element damage to the nature and acquiesce poisonous gasses into the cabin of your vehicle. The most commonplace judgment for replacement is the gospel that a defective exhaust is correct blatant and can rationale you to receive a ticket from the police.
Instructions
Muffler Replacement
1. Jack up the rear of the vehicle and secure it with jack stands.
2. Loosen and remove the two or three nuts holding the muffler to the intermediate pipe using a ratchet and socket.
3. Push the muffler hanger away of the rubber exhaust hanger attaching it to the vehicle. Lower the muffler from the vehicle and remove the mature gasket between the muffler and the intermediate conduit.
4. Apartment a contemporary gasket on the studs and settle the late muffler in put on the studs. Tighten the nuts, using a torque wrench and socket, to manufacturer specifications inaugurate in the repair guide.
5. Push the muffler hanger back into the rubber exhaust hanger on the vehicle. Commence the vehicle and listen for any leaks.
17.Remove the nuts approximately the exhaust manifold using a ratchet and socket. There Testament be between six and eight nuts.18. Remove the nuts connecting the manifold to the down pipe using a ratchet and socket.
7. Loosen the nuts that connect the main to the catalytic converter and the muffler using a ratchet and socket.
8. Remove the conduit by pushing the muffler In relation to the rear and sliding the studs away. You can then pull the conduit off of the catalytic converter. Remove the gaskets from both the catalytic converter and the muffler.
9. Lay a contemporary gasket on the catalytic converter studs, assign the studs wound up the intermediate tube and finger tighten the nuts. Slide a original gasket on the muffler side of the channel. Push the muffler In relation to the rear and slide the studs of the intermediate conduit terminated the muffler flange. Tighten all of the nuts to manufacturer specifications listed in the repair handbook with a torque wrench.
10. First step the vehicle and listen for any leaks.
Down Pipe Replacement
11. Jack up the front of the vehicle and secure it with jack stands.
12. Loosen the bolts holding the down tube to the catalytic converter and the nuts connecting it to the exhaust manifold. Account a ratchet and a socket to loosen these nuts.
13. Remove the drainpipe by pulling it off of the catalytic converter then pulling it down from the manifold.
14. Lay a late gasket on the studs from on the catalytic converter and apartment a latest doughnut gasket on flange that bolts to the manifold.
15. Slide the down channel onto the catalytic converter studs and tighten the nuts by handwriting. Slide the channel on the stud on the manifold and tighten the nuts by help. Torque the nuts to manufacturer specifications listed in the repair book. Open the vehicle and listen for leaks.
Exhaust Manifold Replacement
16. Direct the hood of the vehicle.
Intermediate Pipe Replacement
6. Jack up the rear of the vehicle and secure it with jack stands.These nuts are on the underside of the flange.
19. Remove the manifold by pulling it from the studs on the engine and lifting it up off of the down pipe.
20. Remove the old doughnut gasket from the down pipe and the old manifold gasket from the engine studs. Place new gaskets in both areas.
21. Put the new manifold on the down pipe and tighten the nuts hand tight. Push the manifold onto the studs coming from the engine and torque all of the nuts to the manufacturer specifications listed in the repair manual.
22. Start the vehicle and listen for and leaks.
