The fuel injector in a Toyota Corolla mixes fuel with air under energy and rendered carburetors discontinued during the slow 1980s. One utility of a fuel injector is the programmable firmware that allows the corresponding hardware to attempt with changed fuels. The fuel injector meeting includes peerless the nozzle and valve; it yet requires a pump to deliver fuel into the engine.
Instructions
1. Arbitrate which fuel injector your Toyota Corolla Testament occasion. This depends not sole on the conceive and representation, however as well the engine dimensions. Models fabricated from 1966 to 1970 own a 1.1L or 1.2L engine. It debuted in 2006 and is available with a 1.5L, 1.8L or 2.4L engine.4. Assist the fuel course power and disconnect the antagonistic cable to the battery with a socket wrench.
Models manufactured from 1988 to 1992 accommodate a 1.3L, 1.5L, 1.6L or 2.0L diesel engine. Models fabricated from 1993 to 1997 again proposition a 1.8L engine. Models built from 1998 to 2005 in the USA were available onliest with a 1.8L engine.
3. See the new time of the Toyota Corolla. Models built from 1970 to 1978 hold a 1.2L, 1.4L or 1.6L engine. Models made from 1979 to 1987 may be equipped with a 1.3L, 1.6L or 1.8L diesel engine.2. Stare at adjacent versions of the Toyota Corolla.
Remove the air cleaner and disconnect the bracket for the accelerator cable from the throttle entity with a socket wrench. This Testament concede you to detach the throttle item from the air intake chamber.
5. Remove the engine hanger and exhaust gas recirculation assembly with a socket wrench, if present. You will now be able to take off the cover for the air intake chamber and gasket. Detach the electrical connections for the fuel injectors and the fuel lines. Use a socket wrench to take the fuel rail assembly off the intake manifold, including the insulators and collars.
6. Coat each new O-ring lightly with gasoline and place it on the new fuel injector. Install the new fuel injector and ensure it can rotate smoothly in both directions.
7. Complete the installation by reversing the removal steps. Use a torque wrench to tighten both fuel rail mounting bolts to 11 ft. lbs. Torque the bolt for the fuel inlet pipe to 22 foot pounds and use an X-pattern to torque the throttle body mounting bolts to 16 foot pounds.
