Provided you require to alter parts commensurate a brake caliper in a Plymouth Voyager, you might exigency to trial parts for the Chrysler minivan under the identical alias. Practise definite any replacement parts come from a reputable source and they Testament assignment on your Plymouth pc.
Instructions
Remove the Old Caliper
1. Lift the front mark of the machine securely on a jack stand and remove the wheels. The Plymouth Voyager sole has calipers on the front brakes, in that it uses drum brakes on the rear axle.
2. Unscrew the attaching bolt on the brake hose to disconnect it from the caliper. Plug up the limit with a meager portion of rubber. Toss outside the copper washers, as you Testament longing to bag recent ones upon meeting.
Fill the brake master cylinder with fluid. Connect the brake bleeder valve to a container of fluid with a rubber hose and have another person remove air from the system by using the brake pedal.8. Install the wheels back on the van.
4. Disinfected the abutment surfaces and lubricate them multipurpose lubricant. Run a mist of water over the surface and use a damp rag To cleanse them. Never dry clean brake parts because of asbestos risk.
Install the Replacement Caliper
5. Place the replacement caliper over the brake pads and rotor. Make sure you don't damage the caliper seals or guide pin bushings from the steering knuckle bosses.
6. Install the guide pin bolts and the brake hose to the caliper. Use new washers with the brake hose's fitting bolt.
7.3. Disconnect the caliper handle pin bolts securing the caliper to the steering knuckle. Slide the caliper slowly elsewhere from the knuckle. Slide the caliper's contrapositive location absent from under the knuckle's machined abutment.
Attach the lug nuts to half their full torque before lowering the van, then finish tightening them.
9. Set the brake pads. Pump the pedal until it feels firm. Test the brakes out on the road.
