A Nissan Pathfinder, passion most SUVs, is dependent on its brakes. Remove the cooperate mounting bolts from the caliper. Lift the caliper out from the knuckle to remove it.
Installing the New Caliper
4.
Removing the Old Caliper
1. Remove the true tire and rotate meeting once the vehicle is safely raised and supported on the jack stand.
2. Disconnect the brake hose from the caliper by removing the attaching bolt. Plug the brake hose with a dwarf quota of rubber to prevent brake fluid loss and contamination.
3. Replacing a worn or cracked brake caliper is not an elementary daily grind and is first-class done by an Professional. Expatiation with one to produce undeniable you apprehend prerrogative what to effect before you proceeds on such prolongation yourself.
Instructions
Position the distinct caliper meeting onto the knuckle. Generate trustworthy the rotor fits between the brake pads. Install the bolts and tighten them to the receive torque.
5. Connect the brake hose to the caliper. Operate new washer with the attaching bolt and torque the bolt to 12 foot pounds to 14 foot pounds.
6. Bleed the brake system of air. Open the bleeder valve and have someone else hold down on the pedal to remove the air. Disconnect the negative battery cable before doing this.
7. Use the brake pedal again to test the whole system. Make sure the pads are set and the pedal is firm, and make sure there are no leaks.
8. Reattach the wheel and lower the vehicle. Test the brakes on the road.
