A au courant distemper task can highly doctor up the gaze of a motorcar or Motor lorry. When areas of the vehicle are masked off to prevent whitewash from getting on positive surfaces, a raised tape contour can completion when the masking counsel is removed. This tape wrinkle is the arrangement of the cutting edge layer of emulsion which has Dried apricot at the path of the tape. To blend in the latest gloss and remove the tape contour, you Testament charge to colour sand and buff the borderline.
Instructions
1. Adjust sure the area around the tape line is clean. Dirt on the paint will scratch the paint when sanding it.
2. Soak a piece of 1,200-grit sandpaper in clean water. Place the sandpaper on an automotive paint sanding pad. Color sand the area along the tape line. This will remove any residual polishing compound from the paint. Use your fingers to feel the raised area of the tape line. Once the line is gone, do a final sanding using 2,000-grit sandpaper.
3. Place a small amount of polishing compound onto a clean shop rag and apply it to the sanded area. Turn the automotive buffer on its lowest setting and lightly buff the sanded area. Use a circular motion to remove any sanding marks.
4. Put a clean pad on the buffer and rebuff the area to remove the polishing compound.
5. Use a clean, dry shop rag and wipe down the polished area. Use gentle pressure and sand in one direction. Do not sand in circles. If the paper beings to dry, spray the area with water from a spray bottle. As the tape line begins to vanish, switch to 1,500-grit sandpaper.
