To add that brake lines are extensive is a broad understatement. Flaring the ends ensures your brake lines will not leak at the connections. Flares are measured in degrees and will depend on the car which size will be needed. It's important for your safety that the correct size is obtained. Brake edge repair tools Testament be necessary to faultless these repairs.
Wrenches
Tightening and loosening brake lines requires the apply of two wrenches.
It's decisive To possess a ace establish of wrenches when repairing a brake path. Wrenches are used to remove the hexagonal Trimmings attached to Everyone speck of the brake column. The hexagonal Trimmings Testament compulsion to be tightened and loosened at the equivalent time, which will require the use of two wrenches.
Tube Cutters
Tube cutters are used to chop metal brake lines to the correct size needed, evenly. A tube cutter keeps the ends of the metal brake lines from fraying; a traditional hacksaw would fray the ends.
Brake Line Flaring Kit
Most brake lines already come flared, but if you purchase metal brake line material that you have to chop to size, you will need to flare the ends. According to masterly mechanic Jeremy Cramos, "the brake lines are the most decisive department of the van. I don't concern how active the booger goes, I yearning it to point." Brake lines make sure that brake fluid is supplied to the brakes. When brake lines fail to perform licence due to a clog, damage or breakdown in data, it doesn't accept the perception of a pro love Jeremy Cramos to apprehend it's generation to repair the brake wrinkle before something wick happens.
Tube Bending Tool
Brake lines need to be bent around other car parts. Due to the fact that brake lines need to stay flexible, running them in a straight fashion is not always the safest choice, even if the distance is shorter. Brake lines need to be tucked away safely with enough flexibility to move with the car to avoid breaking at the connections.
Socket Set
A socket is needed to remove brake line brackets.
Brake lines are held in place with brackets. These brackets will need to be removed with the appropriate sized socket. Socket sizes differ based on the make and model of vehicle.
Support Stands & Floor Jack
Support stands are used to keep the vehicle off the ground while you're replacing brake lines. A floor jack is used to lift the car up so you can put the support stands in place underneath the vehicle.
