Window seals prevent brisk air from entering the homely.
Wick rubber, window seals acquiesce air to enter your local or vehicle. You can line latest seals to alter the enfeebled ones, however it is even cheaper to alternate the seals yourself. Rubber seals can be fashion at most hardware stores and window repair shops.
Instructions
House Windows
1. Exercise darner nose pliers to strip the getting on seal from the window. Applicability a razor blade to scrape the getting on glue and remnants of attached rubber from the window.
2. Employ a thin layer of super glue or loctite to the contact points approximately the window. Accomplish not use the glue to the glass surface.
3. Apply a rubber seal with a Broad face and an encompass tab to convert the out of date seal. Wedge the involve tab between the window frame and the window. Tap the seal with your palm to conscription it in compass.
4. Site the seal when you reach the starting point and use the razor blade to chop the seal. Peel the sticky strip from the seal and attach the seal to the window frame. Run the seal around the frame, using your fingers to push it into place.8. Stop the seal when you have come full circle.
5. Open the car window. Use needle nose pliers to remove the window seal. Use a razor blade to scrape the remaining rubber and glue from the window frame.
6. Apply a thin layer of super glue or loctite to the contact points on the window frame.
7. Use a seal with a window slot as a replacement. Apply a small bead of glue to the starting point and push the two ends together. Allow the glue to dry completely before you test the window.
Car Windows
Use the razor blade to cut the seal. Apply a small bead of super glue to each and hold them together until the glue has dried.
