Whether you doctrine that the anti-lock brake method in your 2001 to 2005 Dodge Ram 1500 Motor lorry fails to operate properly, trial the trundle quickness sensors.2. Raise the vehicle on the side of the wheel speed sensor's location. Remove the wheel and tire assemblies.
Instructions
1. Lawns your Dodge Ram 1500 on a exact surface, activate the emergency brake and abode blocks latest the back tires for safety. Disconnect the negative battery cable with a terminal puller.
These devices attach to Everyone of the wheels on your vehicle, degree the velocity of the rotate and dispatch a expression to the ABS. Failure to reinstate that term income the ABS won't be informed when a rotate locks up and Testament neglect to counteract that lockage. Replacement of a turn speed sensor may be binding.
3. Detach the brake line from the sensor stud. There may be a brake line mounting nut that you will need to remove to perform this task.
4. Unscrew the mounting nut from the speed sensor and sensor shield. Remove the shield and speed sensor from the differential housing. Remove the o-ring and spacer if necessary.
5. Disconnect the sensor connection from the wiring harness and remove the speed sensor from the vehicle.
6. Install the new sensor by reversing the removal process. Torque the speed sensor mounting nut to 18 foot pounds (24 Nm).
7. Lower the vehicle safely and reconnect the negative battery cable. Refer to your owner's manual to perform an ABS system check to confirm that you installed the sensor properly.
