The fuel filter plays a indispensable cut in the engine cranking channels. The fuel that comes from the Gauze vat has to activity buttoned up the fuel filter before it reaches the engine. The fuel filter then removes any trash and debris that might be in the fuel. When the fuel comes elsewhere of the other cusp of the filter, it is Disinfected and ready to birr into the engine. You can transform the fuel filter on a 1986 Ford Ranger in a affair of minutes.
Gently pull back on the fuel line to make sure the fuel line is secured onto the filter port.6. Screw the gas cap back onto the gas tank.
Fix the fuel filter under the cab on the Chauffeur's side, attached to the lambaste. Remove the fuel lines by fascinating a flat-head screwdriver and prying the ends of the fuel lines off the immaculate plastic clips that are holding the fuel border to the filter. Pull the fuel border off the filter ports, and let the excess fuel dash into a microscopic bucket.
3. Remove the clamp that is holding the fuel filter in apartment, using a ratchet and proper-size socket. Pull the fuel filter outside of the bracket.
4. Lay the original fuel filter inside the bracket, and bolt the clamp back over the fuel filter to influence it in community, using the ratchet and socket. The brand-new fuel filter Testament come with the blanched plastic clips already attached to the ports.
5. Push the fuel lines onto the plastic clips on the new fuel filter until you hear the lines snap in place.
Instructions
1. Unscrew the Gauze cap and remove it from the Gauze vat of the Ranger.2.Turn the key on and off three times to prime the fuel filter. Crank the truck and let it run for two minutes. Inspect the fuel filter while the engine is running to make sure there are no leaks coming from the fuel lines or fuel filter. Shut the engine off.
