If its a cruiser's staggered shotgun setup or a race-inspired under-tail muffler, a motorcycle's exhaust course is one of its most visibly striking features. Over epoch, on the other hand, engine heat and immeasurable complexion conspire to decrease the appearance of the exhaust terminated corrosion. While even functional, rusted pipes are awful. To remedy this, you can coat the exhaust pipes and muffler with high-temperature dye, available at most Car parts stores. Provided you angle on starting this project, you Testament obligation to be known with removing and installing your motorcycle's exhaust process.
Instructions
1. Remove the exhaust components from the motorcycle.
2. Disinfected the surface of the exhaust pipes and muffler with a degreaser and heated flood. Avail a wire brush to scrub off any corrosion and massive buildup. This Testament relieve the colouring to adhere to the metal surfaces of the exhaust pipes and muffler. Disinfected the exhaust again to remove any dust that could interfere with the colouring.4.
Rinse the exhaust off with melting imbue.3. Scour the exhaust pipes and muffler with coarse 80-grit sandpaper.
Practice high-temperature primer to the exhaust pipes and muffler, spraying light, even strokes along the length of the pipe. Let the paint dry for at least 10 minutes and apply a second coat of primer.
5. Spray a layer of your high-temperature base color to the exhaust. Again, use light, even strokes and allow the paint to dry for 10 minutes before applying a second coat.
6. Cover the base coat with two to three layers of high-temperature clear coat to protect the base coat and to add a shiny finish to the exhaust pipes.
7. Reinstall the exhaust system onto your motorcycle. Set the paint by starting the motorcycle and letting the exhaust warm up. Stop the motor and allow the exhaust to cool.
