Whether you acquisition that someone stripped or broke one of the shove nuts and studs on your Toyota Tacoma, you call for to convert it. Accumulate the parts in the disposal of their Emigration and you'll gain an inconsiderable future reassembling the spin once you've replaced the stud.
Instructions
1. Buy latest studs to transform the revolve stud on your Toyota Tacoma. Whether you don't notice the immensity, remove the stud and revenue it to the Car parts store for a match.
2. Attending for the jack and tools carry on the seat back in the public representation and under the rear seat in the coupled and access cab.
3. Jack up the vehicle, placing your jack succeeding to the stud that you desideratum to modify. Block the tire diagonally across from the shove you jacked up. Remove the tire. Return off the caliper and the rotor on the front wheels so you can access the hub.
4. Capture off the drum brakes and parking brake shoe provided you change a rear tire stud in the 2005 or 2006 base. This should push it out the back. It's the same process whether you took off the hub or left it on the vehicle.6. Insert the new wheel stud back into the hole.
On earlier models, you just need to disconnect the cable for the parking brake and remove the shoe.5. Pound on the head of the stripped or broken wheel stud.
Put wheel bolts on the stud with the angle side of the bolt outward and tighten the bolts until you seat the new stud. Use an impact wrench to make the job go faster. You need to check the back to see if it seated properly and is even with the other studs.
7. Remove the extra bolts used to seat the stud and reassemble everything in reverse order. If you replaced the wheel stud on your Toyota Tacoma properly, all the wheel studs should be even and ready for the nut or wheel bolt.
